Articles:

Clean Machine (Fuel and Air Induction Cleaning)

As your vehicle ages, its performance isn’t quite what it used to be, but many of us never notice the change because it’s gradual.  So here are a few questions to ask yourself.  Does your vehicle feel like it doesn’t have the pep that it used to? Have you noticed your fuel economy isn’t quite as good as it once was? Does it idle roughly or is it hard to start?  Do you hear the engine knocking? Has it recently failed an emissions test?

All of those can be signs that your fuel and air induction systems are dirty and need cleaning.  Your fuel system takes gasoline from the tank to the engine’s combustion chambers where fuel injectors spray fuel that mixes with air and is ignited by spark plugs.  Black carbon deposits eventually can build up, obstructing fuel flow and diminishing your engine’s performance and fuel efficiency.

The air induction system is what allows air to go into the engine’s combustion chamber.  Getting the proper air flow is necessary for you to quickly start your vehicle, accelerate, and perform the way it should and idle smoothly when you’re standing still.  Like the fuel system, your air induction system can get blocked up with deposits and other contaminants.

A professional fuel and air induction cleaning can help restore your performance and fuel economy, especially when you are experiencing problems.  A technician will use specialized chemicals that can remove the carbon buildup.  In extreme cases, they will remove the fuel injectors and clean them with specialized tools.  

After cleaning, you may notice how much more pep your vehicle has and how smoothly it runs.  Keep your fuel and air induction systems clean and enjoy your vehicle’s performance improvements.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Motor Oil—The Synthetic Advantage (Synthetic oil vs Conventional)

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:
•    Conventional oil, extracted from the ground and refined.
•    Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
•    Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil. 

•    Synthetic oil provides better protection for your engine while helping it to perform better.
•    Conventional oil breaks down over time, while synthetic oil lasts longer.
•    Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge. 

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes. 

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits. 

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment. 

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

No Fueling Around (Fuel Filter Replacement)

A driver called in to the shop the other day saying his European sports sedan had an odd problem.  He was driving when his car started to slow down.  Applying more throttle didn't help.  He pulled over to the side of the road, shut the engine off and waited a few minutes before starting it up again.  It ran fine… for a couple of minutes.  Then the same thing happened.  He was able to finally get home by stopping and restarting, and he was calling to see if we could take a look at it. 

Turned out it was one of his car's fuel filters that choked up with debris so badly that enough fuel couldn't get through it.  When he stopped the car, enough fuel could flow through the unpressurized fuel line to supply enough fuel for a couple of minutes when he restarted his car. But then the pressure would cause things to clog again.  

There are other symptoms that point to a failing fuel filter. Perhaps your engine misfires, your vehicle is hard to start, or your fuel pump starts making odd noises. 
If you experience any of these signs, bring your vehicle in so we can have a technician check it out. 

Many vehicles have at least two fuel filters. One is a strainer that is part of the fuel pump in the fuel tank, and the other is in the main fuel line. Your vehicle's manufacturer recommends how often yours should be changed, but your driving habits and environment (such as dirty or dusty conditions) may mean yours will have to be replaced more often.  

The technician will also look to see if your vehicle might have another problem that's causing your fuel filter to fail more frequently than normal, such as corrosion in the fuel tank. 

Your engine needs fuel to run. Maintain the health of your fuel system and that will help keep you on the road to your destination.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

It's (Not) Complicated (Engine Air Filter)

While many components of your vehicle are complex and composed of lots of mechanical and electrical parts, there's one that isn't complicated but still important.  It's your engine air filter.

(And, we should point out, the engine air filter isn't to be confused with the cabin air filter.  The cabin air filter cleans air that goes into the passenger compartment while the engine air filter cleans air that goes into the engine itself.)

Why does your engine need a filter? Think of all the stuff–dirt, dust, and debris in the air¬–that gets kicked up on the road.  If that were to go unfiltered into your engine, it could damage other components.

There are many different materials used in an engine air filter, including paper, cloth (frequently cotton), and other synthetic fabrics.  The material is usually folded tightly to maximize the filtering capability over a relatively small surface.  

Before computers were employed to determine the proper mix of air and gasoline, a dirty air filter could contribute to a decline in fuel economy.  But a study of engine air filters done by the U.S. Department of Energy in 2009 found that in modern fuel-injected engines, computers can maintain the correct air/fuel mix even when an engine air filter is really dirty, minimizing effects on fuel economy.

That same clogged air filter, though, can affect your vehicle's performance, mainly how much power and acceleration it delivers.  In testing three different vehicles, a dirty air filter made the vehicles slower by about 6-12%.  That's something you'd definitely notice if you were driving.

But it happens slowly, over the course of several months, so you might not even know your engine air filter is dirty unless you bring it to us and have a technician inspect yours.  

There are many different types of engine air filters, from the ones made by the original vehicle manufacturer to aftermarket ones.  Some can increase your engine's performance; some can be washed and re-used but are generally more expensive.

Your service advisor can recommend several options for you, depending on the type of vehicle you drive and your driving habits.  Dirty, dusty roads will require more frequent engine air filter changes than cleaner drive routes, and each vehicle manufacturer recommends when your filter should be changed.  Keeping it clean will help your engine breathe a little bit easier.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Avoiding Exhaustion (EGR Valve Replacement)

No, ERG isn’t the sound a pirate makes.  It’s a part in your vehicle that recirculates exhaust gas to reduce certain gases and pollutants in the atmosphere.  In fact, ERG stands for “Exhaust Gas Recirculation.”

One gas our vehicles may make when they burn fuel is nitric oxide, which can play a big role in creating smog and acid rain.  It’s better for our planet if our vehicles aren’t spewing that into the air.  

One inventive way of reducing it is by taking the exhaust and channeling it back to the vehicle’s air intake system. When it travels through the engine again, its composition is changed, and it comes out cleaner.  It also helps the engine be more efficient.

The EGR valve can fail after a while, and some signs you may notice are the engine is miss firing, it may suddenly lose power or your Check Engine light may come on.  You may also see your fuel economy decrease or hear your engine knock. A bad EGR valve can also make your vehicle fail an emissions test.

There are several different types, including newer ones that are electronically controlled rather than working on vacuum pressure.  They are found in newer gasoline and diesel vehicles. If you notice any of the symptoms of a failing EGR valve, bring your vehicle in so a technician can check to see if your EGR is still up to its “exhausting” job.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Getting Off to a Running Start (Starter Replacement)

When you start your vehicle’s engine, there’s another motor that makes that whole process possible.  It’s called the starter, and it’s a small electric motor that gets your vehicle running.  

As you can imagine, it’s quite a chore for a little electric motor to turn over the big engine that powers your vehicle.  And after hundreds of successful starting missions, after a while, it will start to give out.

You’ll know the starter is starting to give up the ghost when it turns too slowly or sometimes doesn’t do anything when you turn on the ignition.  Maybe it makes funny noises like grinding when you try to start your vehicle or maybe there’s just a click. Those are all reasons to get your vehicle over to us so we can see what’s going on. 

A technician will make sure the problem is the starter and not in the battery, a switch, or other electrical component or connections.  If all of those are ruled out, your starter will be replaced.  The technician will also make sure all the cables and connections to the battery are clean and solid.  

Often starter problems come on gradually, and they often give you advanced warning that it’s time to have it fixed—before you find yourself frustrated— and stranded.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Smooth Operator (Shocks and Struts)

Few of us ever drive somewhere without encountering some pretty rough roads, and it's amazing how well our vehicles are able to smooth out the ride. Thank your shocks and struts.

The two parts are similar.  Some cars have shocks in the rear, and struts in the front.  Others have struts all around.  A shock absorber uses a cylinder filled with gas or liquid that's connected to your vehicle's frame and axle.  When your vehicle encounters an imperfection in the road, the shock dampens the motion. 

A strut is essentially a shock absorber mounted inside a spring and can support more weight than a shock by itself.

Shocks and struts take a lot of punishment and wear out.  When they do, your tires are not contacting the road as much as they should, and that can result in a bumpy, unstable ride. Worn-out shocks and struts also transfer the impacts of road imperfections directly to your vehicle's body which can cause further damage to other parts.

You can tell when your shocks and struts are wearing out when your vehicle's ride is bouncy, you feel the bumps and body motion a lot more than you used to, or you may see fluid leaking from the areas near the wheels.

How often your shocks and struts need replacing depends on what surfaces you drive on, how far they've traveled, and how long they've been on the vehicle.  Our technicians can check the condition of your shocks and struts and advise you when they need to be changed.  Shocks and struts should always be changed in pairs.  

Because shocks and struts wear out gradually over a long time and distance, experts recommend you have them checked at least once a year.  Plus, if you know you've recently hit something especially hard in the road, you should have your suspension checked just to make sure it's ok.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

U and your U-Joints (Lubricate U-Joints)

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces.

As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer. 

There are signs you can look for that your U-joints need attention.  You may hear a clunk when the gears shift into drive or reverse.  You may feel your vehicle vibrate as you move down the road.  Other signs are leaks at the back of your transmission or a banging sound right before you lose power.  Sometimes, though, if you wait until you notice these symptoms, the U-joints may already be damaged.  

That’s why it’s important that your vehicle’s U-joints be periodically inspected and lubricated.  At the same time, a technician should thoroughly inspect the driveshaft and other connected components.  

Keep your U-joints in good shape, and both of U will continue to enjoy years of reliable transportation.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Why did my vehicle fail its emissions test?

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.  

Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen?

One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go.

Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not be working.  It may be physically damaged, or the steady flow of exhaust gases has fouled the converter. 

You may have a bad oxygen sensor. It’s supposed to measure how much oxygen is in your exhaust.  This can cause the air-fuel mixture to be too rich, resulting in too many hydrocarbons in the exhaust. Your ignition system may also have problems, such as worn-out spark plugs.  Dirty fuel injectors can contribute to excess emissions.

Believe it or not, a dirty engine air filter may be the culprit. If it hasn’t been replaced for a while, your vehicle may be emitting too many hydrocarbons -  something that will cause your vehicle to fail the emissions test.

You can usually avoid a failed emissions test by maintaining your vehicle regularly.  The best way to do that is by bringing it to our trained technicians, so your vehicle gets the service it needs, scheduled and non-scheduled.  Plus, you’ll be doing your part to keep our air clean.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Camarillo Car Care Center is committed to ensuring effective communication and digital accessibility to all users. We are continually improving the user experience for everyone, and apply the relevant accessibility standards to achieve these goals. We welcome your feedback. Please call Camarillo Car Care Center (805) 482-2853 if you have any issues in accessing any area of our website.