Auto Repair in Camarillo

Most light vehicles (under 10,000 pounds/4,500 kg) in North America sold from 2008 model year on have a feature that many people are confused about.  It's the tire pressure monitoring system (TPMS).  You may have some experience with it yourself if you own a newer vehicle.  Vehicles with TPMS have sensors in each tire that are supposed to warn the driver when tire pressure gets dangerously low.  That's important because tires that are significantly under-inflated can cause very serious accidents.

Unfortunately, many drivers think the TPMS does all the work keeping track of tire pressure. To them, as long as the warning light or gauge isn’t giving a warning, the tires must have the proper amount of air pressure in them.  That's not the case.

Tire pressure monitoring systems aren't all created equal.   Some give you a digital readout of the pressures in each individual tire.  But many simply have a warning light that looks like the cross section of a tire with an exclamation point in the middle.  If you don't know what it is, it's because it's not instantly recognizable as a tire.  In fact, one company that makes TPMS, Schrader Performance Sensors, surveyed drivers.  Their study showed that more than 40 percent of drivers didn't know that that warning light was. 

One out of 5 of the drivers who did know what the light was only looked at their tires after the light came on to see if they could see any that needed air; they never checked them with a tire gauge or had someone else do it.  Ten percent of them didn't do anything when the light came on.

In most vehicles with TPMS, the warning comes on only when the tires are more than 25% underinflated.  The American Automobile Association says that's under the pressure you need for safe vehicle operation.

The bottom line is once a month you should make sure your tires are inflated to the manufacturer's recommendations.  That means each tire should be measured with an accurate, external tire gauge.  To be confident you are getting a correct reading, take your vehicle to a reputable service facility where their equipment is calibrated and they know what they're doing.

Severely underinflated tires can contribute to an accident that kills or severely injures people.  The idea behind TPMS is well intended, but the system was never meant to replace regular inflation measurements and maintenance.  Periodically have your tires checked for proper inflation.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You know you have an accelerator pedal; step on it and your vehicle is supposed to go.  But did you know there is a part in your vehicle that keeps track of where the throttle is? It's called the Throttle Position Sensor, or TPS.

The TPS is a sensor that helps your vehicle figure out the right mix of air and fuel is reaching your engine.  It does that by keeping track of the throttle and sending that information to your vehicle's computer.  Other factors play a role in how well your engine is performing, including air temperature, how fast the engine is turning over and air flow. 

When the TPS isn't working right, you may find your vehicle won't accelerate or doesn't have the power you're expecting when you press on the accelerator.  In some cases, it may accelerate on its own.  Sometimes your vehicle won't go over a certain speed.  Your Check Engine light may go on.

Any of these symptoms should be checked out soon.  If your TPS stops working right, your vehicle may not be safe to drive.  Fortunately, most vehicles have a "limp home" mode that will allow you to get off a busy road to a safe spot. 

Your service advisor can let you know which TPS is the correct replacement for your vehicle.  Your shop may have to re-program the new TPS so it works correctly with other software in your vehicle.

It's a fact of life these days that computers control many of a vehicle's functions. The sensors that feed information to those computers help make your vehicle work the way it was engineered to and keep you motoring down the road safely and efficiently.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Can you think of anyone who likes getting a flat tire?  Of course not.  But when one of your tires winds up with a flat or leak, whether it be from things like hitting a curb, running over a nail or picking up a sharp stone, it's time to have someone who knows what they're doing take care of it.

If you're thinking you'd like to avoid having to buy a new tire, you wonder if a patch or plug will suffice.  It depends where the puncture is and how big the hole is.  Most tire experts will say if the hole in the tire is less than ¼ of an inch or 6 mm, a patch can work.  But a patch likely won't work if the compromised part of the tire is on its shoulder or sidewall.

Here's why.  The shoulder of a tire is the part between the sidewall and tread and it's usually rounded.  It's under a lot of pressure, more than even the sidewalls. And because of that curved shape, it's hard to get a patch or plug to hold.

The sidewall is the side of the tire.  Sidewalls flex a lot when you drive, and the strain can cause a patch or plug to loosen up.  A weak spot in a sidewall is much more likely to fail and cause a blowout.  So if you have damage in the sidewall or shoulder, that tire is a good candidate for replacement, not repair.

If you have a cut or gash in your tire, it's possible the cords that strengthen your tire have also been cut.  That weak spot can spell trouble, and this type of damage usually means you should get a new one.

Your service advisor can tell you what the appropriate action is to take when you have tire damage.  You may be able to get good results with a patch, or you may have to replace one or more tires.  Your safety is riding on them.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Don't love winter weather? Here's a list of four things you need to keep a watch on during the winter months.

Let's start with coolant levels.  Coolant is as important in cold weather as it is in hot weather.  Think of the term "anti-freeze." Your coolant needs to be adjusted for climate and temperature so the coolant doesn't freeze when the vehicle isn't running. Your service facility will know the right mixture.

Next, windshield wiper fluid. Winter weather can be challenging when it comes to visibility, so it's important to have the correct windshield washer fluid.  Some of it is specially formulated for ice and freezing temperatures. And it won't freeze if your vehicle has to sit out in below-freezing temperatures.  And don't forget you can get winter wiper blades that stay clearer in snowy, icy weather than ordinary blades.

Don't forget your tire pressure and tread.  After all, tires are what connect your vehicle and the road.  As temperatures go down, so does the air pressure inside your tires, so it's important to keep that up to the manufacturer's recommended pressure.  Also, make sure your tires have enough tread so they can grip slippery roads. Any service facility can perform a simple test so you'll know. If you need some new tires, they can help you find those that will fit your driving patterns.

Finally, oil gets thicker when the temperatures go down, so it's important to have the proper viscosity for your climate.  Consult your service advisor who will make sure your vehicle is using what the manufacturer recommends.

Keep your vehicle prepared for winter weather and it will reward you with the safety and performance it's designed for.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You may live in a region where roads become pockmarked with craters known better as potholes.  They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road.  And when your vehicle hits one of those holes that's big enough, the impact can flatten a tire, bend a wheel or tear apart a suspension component. 

To minimize pothole damage, leave enough room between you and the vehicle in front of you so you can see the road surface and any upcoming potholes.  That way you'll have time to slow down and steer around them.  Also, if you see what looks like a puddle of water, it may be hiding a pothole underneath, so treat it as if was a pothole.

If you keep your tires inflated to the manufacturer's specifications, they're more likely to withstand hard impacts.  And the slower you're going when you hit a pothole, the less likely you are to break something.   But if you do find you've hit a pothole pretty hard, here are some signs to watch out that could signal damage.

• Your vehicle pulls to one side
• The steering wheel shakes
• You hear noises or clunks coming from your suspension
• Your steering wheel is not centered when you are going straight

These are all symptoms you should have checked at your vehicle repair facility as soon as you can. The longer you wait, the more damage you may be doing.

You also may find after hitting a pothole hard that the tire on that wheel is flat. Try not to drive any more on that tire since you could do a lot more damage to the tire and/or wheel. A call to roadside assistance may save you money in the long run by limiting the damage to what's already done.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be.  Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin.  Pretty tall order, wouldn't you say?

The parts that face that task daily are called the motor mounts, or engine mounts.  They are usually made of rubber with steel brackets.  Others contain a liquid for vibration and sound isolation. 

Most vehicles have three or four motor mounts, and while rubber or hydraulic liquids do a good job of damping the vibrations from the engine, they also have their limitations.  The problem with rubber is that it gets old and brittle.  Plus, if there's an oil leak anywhere in your engine and oil gets on the rubber motor mounts, rubber will deteriorate even more quickly.  As for the liquid motor mounts, they can develop leaks and stop working. 

Here are signs a motor mount is going bad.  You may hear a loud clunking or banging sound under the hood.  That means the weight of the engine is shifting around enough to bang against other metal parts.  You may feel bad vibrations, and the engine may feel like it's moving around in a strange way.

When things get to that point, your vehicle can be damaged from that heavy engine knocking against things, and its time to replace one or more motor mounts.  Schedule a visit to your vehicle service facility. There, a technician will assess your motor mounts; if one bad one is found, it's not unusual that others are likely to fail soon and should be replaced before they do.

Because all vehicles are configured differently, some motor mounts are easily replaced.  But others can be much trickier, take a lot longer and therefore are more expensive to replace. 

It's important for your engine's health to make sure motor mounts are sound and solid.  You will maintain that quiet, vibration-free ride and could save your engine and transmission from major wear and tear.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

The other day, a driver was trying to open his vehicle's hood so he could add some windshield washer fluid.  But when he pulled the hood release inside the car, nothing happened. 

Usually, opening any hood is a 2-step process.  You pull the hood release (which is usually a handle under the dashboard to the left of the steering column) and listen for the hood to pop up slightly. (It doesn't open all the way because it has a safety latch to prevent you from accidentally opening it up while you're driving.) Then, you get out and find the latch, usually through the grille near the hood.  There's a little handle on it which you push, slide or pull (there are a few different types) at which point the hood can be opened up all the way. 

But in this driver's case, the hood would not release at all when he pulled the handle inside.  Not knowing what to do, he called his service advisor, who told him to bring it over.  The reason? A hood with a broken latch could be a safety hazard since it is possible it's not securely closed. And in this condition, it's possible for the hood to suddenly release while you are driving, obscuring your view of the road. 

Latch issues can be caused by many things, perhaps a broken cable between the hood release and the latch.  It's possible that cable just detached or frayed after being opened so many times.  If a hood release cable isn't kept lubricated, it can corrode and just lock up.

In this driver's case, the cable had corroded and broken, so it had to be replaced.  Unfortunately, many times you won't know you have a problem with your hood latch until one time you pull it and it breaks without warning.  When your vehicle is in for routine maintenance like an oil change, a technician will often keep an eye out for signs that your hood latch needs attention so you don't get "locked" out of your engine compartment.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Engines required a lot more maintenance in earlier times.  You'd have to have your spark plugs, wires, rotors, caps, distributor points, fuel and air filters changed periodically.  There were mechanical adjustments of a vehicle's timing, dwell, spark gap and idle mixture, too. Unless you like to tinker with old cars, a lot of those terms won't mean much to you. 

That service was called a "tune up" back then, and you can see why.  But now, computers have reduced the number of maintenance items, and a tune up is a whole lot different than it used to be.  In fact, in some vehicle service facilities, that term is also a thing of the past. 

A tune up of today would more accurately be called simply periodic maintenance. Now, most vehicles still have spark plugs and wires, fuel filters, air filters and PCV valves, and they should be inspected tested and/or replaced at regular intervals.  Your vehicle's manufacturer has made recommendations on how often that should be. But it depends on your driving habits. Do you regularly tow a trailer? Do you drive on dusty roads often? Are you driving mostly stop and go in the city?  Depending on your answers, to those maintenance intervals might have to be more frequent.

Your service advisor will likely remind you about those "must check" items such as spark plugs and wires, air filter and oxygen sensor.  And now that the old-fashioned tune ups don't require you to take your vehicle in for maintenance as often, you can get the same benefit from scheduled oil changes or tire rotations.  When your vehicle is in for those, a technician can keep an eye on your other systems (fuel, emissions, ignition) to make sure they are operating correctly.

One thing to remember.  When you take your vehicle in for regular service or a specific issue, don't ever hesitate to ask you service advisor to explain what's being done and why.  Hey, "In Sync" may have been a boy band of an earlier era, but it's always good for you and your service advisor to be "in sync" when it comes to what maintenance is good for your vehicle.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Who thinks about their fuel gauge?  You probably don't… until it doesn't work any more.  Then you have to guess how much fuel is in your tank, and that's no way to live life on the road. 

Fuel gauges, like every other part in your vehicle, can fail.  And when yours stops working, you will probably want to head over to your service facility soon, because no one relishes running out of fuel.

The fuel gauge system is much more than just the gauge you can see on your instrument panel. Most systems have a float inside the fuel tank that goes up and down depending on the fuel level.  It's called the fuel sending unit, and it sends an electrical signal to the gauge (on the dash) telling it to display how much fuel is left in the tank. 

So, what could go wrong?  Well, a few things.  For one thing, corrosion from bad fuel can cause it to stick and it won't move up and down any more.  So you could fill up your tank and the gauge would still read Empty.  If a sending unit needs to be replaced, often the parts can be costly. The good news is that fuel sending units rarely fail and most drivers will never have one go bad.

Other things that can go wrong? An electrical problem could cause a fuse to blow and you won't get a reading at all.  A technician can figure out where that electrical problem is and how to repair it.  Finally, it's possible for the gauge itself (on the instrument panel) to fail.

One thing to keep in mind is if your fuel gauge isn't working, you might be tempted to carry around an extra container of fuel.  That's ok if it's outside the cabin, such as in the bed of a pickup.  But if you carry it inside the cabin or trunk, fuel fumes can be very dangerous for your health, even fatal.

A working fuel gauge gives you peace of mind… so you'll never have that "empty" feeling.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com