Auto Repair in Camarillo

We usually take our vehicle's easy steering for granted until something goes wrong.  Power steering is what makes it almost effortless to turn the steering wheel, aiming your vehicle in the direction you want to go. Without the assistance of power from the engine, steering would be a laborious process, so you want to make sure the system is working well.

Power steering systems are usually one of two types, hydraulic and electric.  The hydraulic type uses a pump that is driven by either a belt or an electric motor.  This system uses hydraulic fluid to create pressure that gives your steering the power assist.  Since that pump is always working, time and distance traveled eventually take their toll, and these systems need to be periodically inspected.  Also, while that hydraulic fluid can last for years, it should be replaced periodically as it degrades over time. Your vehicle's owner's manual contains the manufacturer's recommendations.

A technician can check for leaks in the hoses, pump housing or reservoir.  Also, the belts should be inspected and so should the pump, as these can fail.  Signs of a failing pump are a groaning noise when you turn the steering wheel, stiff steering, squealing noises when you first start your car and puddles of a reddish-brown fluid under your vehicle. 

The other type is called EPS, or electric power steering, which is becoming more commonly used in the latest vehicles.  It only delivers power assist when you need it and has an electric motor that supplies that steering help.  It's more efficient, accurate, compact and clean. And because it has a lot fewer components, it's easier to maintain. 

If you have electric power steering, you may notice sometimes it's hard to turn the wheel or your Check Engine light comes on.  Sometimes the power assist motor fails or there can be problems with electrical connections.  Any time you have symptoms, it's important for your safety and that of drivers around you that you have a technician check them out.

Properly working brakes are essential for the safe operation of any vehicle.  Stop! And make sure yours are working properly.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

If you've ever had a flat tire, then you know welcome it is to have a spare tire that is properly inflated, in good shape and easy to get to.  Problem is many of us don't even give our spare tire (if we even have one) a second thought.

If you have an SUV or truck with a spare, it may be mounted outside the vehicle, such as on the tailgate or underneath the vehicle.  All of them, especially those underneath, take the brunt of debris, moisture, salt and dirt from the road surface, a potpourri of corrosion potential.  The hardware that holds these on can rust into a solid mess, making it hard for you or even a roadside assistance service to get off. 

If you have one of those, have it checked and maintained at your vehicle repair facility on a regular basis.  They should be lubricated and cleaned periodically, and some recommend doing this service every time you have your tires rotated.  If the spare is the same size as the tires on the vehicle, it may be a good idea to have it rotated with the others. 

Some vehicles have compact spares that are in a small well in the trunk or some other spot. Most drivers don't pay any attention to them.  Over time, air leaks out of those spares, leaving them flat when you most need them.  When you have your vehicle in for service or routine maintenance, ask your service advisor for his or her advice on making sure the spare is inflated properly and cleaned, usually at least twice a year.

You may not know it, but your vehicle may not have any spare at all.  Instead, it may have an inflator kit that you are supposed to use to inflate and seal a flat tire.  That sealant has a limited life span and should be replaced every few years.  Check with your service advisor to make sure the kit is up to date and will do the job when called upon.

Manufacturers know a flat tire's always a possibility.  No matter what contingency solution they've included with your vehicle, keep it in shape and in good working order.  When you need it, you'll be very glad you did.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

We all know about winter tires.  But did you know there is such a thing as summer tires?

Most people have all-season tires on their vehicles.  They work pretty well in a variety of weather conditions.  But if you want better handling and performance, you might consider switching to summer tires.  Here are a few things you should know about them.

Summer tires are good for high-performance vehicles like sports cars and luxury SUVs, but they don't have to be limited to those. They have a different tread pattern than all-season tires, with generally shallower grooves and more rubber that contacts the road.  The rubber is made of a stickier compound good for taking corners at higher speeds.  Plus it is engineered so it stays firmer the hotter the temperature gets. 

Here's a bonus.  That design also works well in warm, wet weather.  It makes sense, since more the more rubber that's touching the concrete or asphalt when it's slippery out, the better the traction. 

There are some things to be aware of with summer tires.  They often have asymmetrical or unidirectional tread patterns.  That sometimes limits the way these tires can be rotated on a vehicle.  Another thing to remember is it is NOT a good idea to use summer tires in any wintery conditions.  They lose traction as the temperature heads toward the freezing range and below since that rubber that's designed to stay firm at warm temperatures gets hard as a rock when they freeze.

But in warmer weather, summer tires can increase your braking and cornering capabilities.  Plus you'll notice more grip at faster speeds and higher temperatures than all-season tires.  So think about discussing summer tires with your service advisor to see if they'd be a good fit for the type of driving you do.  He or she will offer you some choices that are designed to meet your vehicle's specs.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

It's happened to all of us.  We're driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision.

Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams.

Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don't use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer.

The quest for the perfect one began back in the 1950s, General Motors invented something it called the "Autronic Eye." It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  While touted as being the biggest advance in night driving safety in 30 years, it didn't work all that well.  But as technology got more advanced, systems improved.

Today's automatic high beam dimmers usually have a camera in the rear view mirror (pointing forward).  When the camera sees lights, software in the system's computer attempts to determine the source of the light, whether it is an oncoming vehicle, taillights, ambient city lights, street lights or the reflection off of a street sign.  It then adjusts the headlights to operate high beams if appropriate or a less-blinding mode if they’re not.

Some automakers are striving to make their headlight systems smarter and safer by developing lamps that can avoid blinding oncoming drivers by means other than simply dimming them. One idea? Splitting the beams so they will block just the portion that shines into the eyes of oncoming drivers.

It's a long way from the Autronic Eye. 

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

The heat is on, and your vehicle takes a beating when it is.  Several of your vehicle's systems are under extra stress in hot weather, so here are a few to make sure are getting the care and maintenance they need.

It makes sense that the cooling system is one to make sure is in top shape.  Vehicle breakdowns in summer are often due to a problem with one of the cooling system's components.  Coolant levels have to be up to specs, the ratio of coolant to water must be correct and the hoses, pumps, belts and radiator must all be working properly in order to prevent vehicle overheating.

Summer is also hard on your air conditioning system.  You might find that no air is blowing out of the vents or maybe only hot air is coming out.  Air conditioning equipment is best diagnosed and repaired by a trained and experienced technician.  The problem could be in any number of components, including the condenser, compressor or blower motor.

You may think the battery gets a break in the summer, but heat will shorten the life of your battery more quickly than cold.  Your service facility can analyze the condition of your battery and tell you whether it's healthy or needs replacing.

Tires take a beating in heat, too.  Pavement can be scorching hot, and the sun's rays break down the rubber.  Watch inflation pressure in hot weather, too, since air expands the hotter it gets.  Your technician can check air pressure, tread depth, cupping and other uneven wear and diagnose the source of any problems. 

And don't forget brakes.  One video online says brakes on a car that were driven hard on a track reached temperatures as high as 500°C/932°F.  Heat can reduce stopping power.  A technician should periodically inspect pads, rotors, drums, lines and other components to find a problem before you lose the ability to stop.

Finally, engine oil is really put to the test when it gets hot.  Your vehicle service facility will make sure you have enough oil and the proper kind to keep your engine's components properly lubricated.  Help your vehicle beat the heat.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Know anyone who doesn't love a power seat in an SUV, a car, truck or van? They're convenient and precise in their adjustments.  But when they break, oh, what a pain.  Not only is it inconvenient, it may leave your seat position too close to the steering wheel or too far from the pedals.  This is a must-fix problem.

There are many things that cause a power seat to fail:

• Seat controls.  These are either at the side of the seat or in the door.  Both are places that can be exposed to moisture or other contaminants.  When the controls stop working, they usually need to be replaced.
• Seat motor.  Electric motors are what make a power seat move, and sometimes they fail.  Sometimes they just get worked to death and die of old age.  Replacement is the most common remedy.
• Fuses. A power seat is, after all, powered by electricity and all vehicle power systems have fuses to protect them.  A technician can determine which fuse may have blown and replace it.  But it's also important to figure out what caused the fuse to blow and deal with that, too.
• Wires.  There are wires under the seats that move when you move the seat.  Sometimes they get stretched, kinked or ripped.  In a power seat malfunction, it may be a wiring harness that needs to be replaced.
• Gears.  They help the seat move and may need to be realigned or replaced.
• Obstructions.  Yes, a piece of trash or a kid's toy has been known to jam up the works of a power seat. Taking them out of the mechanism may get your seat working again.

Most people pay extra to have power seats in a vehicle. So make sure you keep that convenient feature working. And don't forget that it's a safety issue, too.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

"I never expected it could happen to me." Countless drivers have said that after they've had an emergency turn their lives upside down. So before that happens to you, let's thinking about planning ahead for an emergency with a few things you should keep in your vehicle.

• Road flares. If you've ever driven by a disabled vehicle sitting at the side of the highway at night, you know how terribly hard it is to see, especially in bad weather like rain.  If you are the one in that broken down vehicle, you run the risk of being hit by a vehicle whose driver literally may not be able to see you.  The best emergency signal includes one or more road flares.  There's a reason police officers and firefighters carry them in their vehicles.  When you see a series of burning red flares at the side of the road, you know something serious is going on.  These are far more visible at a much longer distance than nearly any other portable signal device.

• Fire extinguisher.  Thousands of vehicles catch fire every year.   Most fires start small but can get out of control. It's vital to have a fire extinguisher in your vehicle, and there are several small ones designed especially for the job.  Since many different types of vehicle fires can start, make sure the extinguisher you choose will handle every fire from gasoline to electrical. Some have handy mounting brackets. And keep it up to date!

• Flashlight.  Sure, your cell phone likely has a light in it.  But you will need that phone for communication if there's an emergency. Plus, the light’s just not that bright.  So carry an LED flashlight designed for automotive use.  LEDs produce a lot of light with little power; plus, many of those designed for vehicles include a lantern which will light up a wider area. It’s vital if you have to read your vehicle's jack instructions or tend to an injured person.

• Drinking water and snacks.  If your vehicle breaks down during bad weather and you may be forced to stay with it for a long time, you'll need food and water to survive until help can arrive.  These are simply the necessities of life, so have a small supply on hand, just in case.

Other things like basic tools, a first aid kit, a space blanket and jumper cables are also good ideas.  Many service repair facilities offer these items for sale, and you can ask your service advisor for suggestions.  While it's fresh in your mind, plan a shopping trip and put together your own emergency kit now.  Sure, you can put it off, but you may find yourself stuck in a difficult situation, saying to yourself, "Only if…"

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint.

One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time.

Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly.

Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintenance; others require periodic lubrication.

Here are some signs that your ball joints are going bad:

• Your vehicle pulls to one side
• You can hear a clunking noise coming from a wheel area
• Your tires are wearing unevenly, especially on the inside

The earlier a failing ball joint is discovered, the better. The best way is to have regular inspections by a technician.  Your service facility will periodically check ball joints at intervals recommended by the manufacturer. The cost to replace them can vary widely depending on whether you have a vehicle with a 2-ball or 4-ball configuration.  Also, sometimes just the joints can be replaced, but other times they are part of a larger control arm assembly that has to have all the parts replaced at the same time. 

Your vehicle's proper steering, handling and tire wear all contribute to a better, safer driving experience.  Make sure your ball joints are up to the job.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

This may have happened to you.  You drive somewhere and get out of your vehicle only to try closing the door and it just won't stay closed!  What a helpless feeling.  You can't lock it; you can't leave it like it is. Or, let's say you head down to your vehicle to head out to work in the morning and you can't open the door.  What are you going to do now?

Vehicle doors take a lot of abuse.  They are opened and closed hundreds of times and we expect them to just keep working perfectly all the time.  They do require a bit of tender loving care.  Let's take a look at two different scenarios of stuck doors.

First: the door that won't close.  It's a security issue.  It's also a safety issue.  You can't really safely drive a vehicle with a door that won't close. What if you or a passenger is tossed out?  Sure, some people try to tie a stuck-open door closed or bungee it, but that's dangerous.  It's best to get that vehicle to the service repair facility as soon as you can, and having it towed is the safest way. 

Second: the door that won't open.  There are many reasons this can happen.  Freezing weather is one, a misaligned door is another.  There could be electrical issues.  Corrosion could have broken a part inside the door.  The possibilities, unfortunately, are numerous.

If you can't get into your vehicle's driver's door, with any luck another door might open and you can climb into the driver's seat and head on to the repair facility.  A lot of people may be tempted to try to fix a stuck door themselves, but many wind up causing more damage to the door and have to have a trained technician step in to repair the mess.

One way to minimize the possibility of having a door stick open or closed is to make sure it gets regular maintenance.  Door locks, hinges and latches should be lubricated at certain intervals.  Locks should be kept clean.  While many vehicles now have electronic locks, sometimes an electrical failure in the vehicle or key fob can inadvertently lock you out.  Nearly every vehicle has a mechanical key in case that happens; if you don't know how that works, have your service advisor show you how. 

Also, you technician can make sure your doors are properly aligned and aren't sagging. All of these things can help you keep your doors opening and closing the way they were designed to. Your next trip may "hinge" on your doors being in top condition.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com