Auto Repair in Camarillo

It's bad enough in cold weather when ice and snow block your visibility.  Add to that fog on the inside of your windows and you could be driving blind.  So here are a few tips on how to keep your windows from fogging up when there's a chill in the air.

You probably know fog is really condensation, when moist, warm air meets a cold surface and turns to liquid.  If your windshield fogs up, you probably turn on your windshield defroster. Most defrosters blow heated air on the windshield glass to warm it up so it won't condense the moisture.  Many also turn on the air conditioning to reduce the moisture. 

That same strategy can work on the rest of the windows.  First, turn up your heater's temperature setting.  The hotter the air, the more moisture it will hold.  Also, turn off the "recirculating" setting since you want all outside air to come in. Then switch on the air conditioning.  It will remove the moisture from the outside  air that it's blowing inside the cabin.  Try cracking a couple of windows to make it easier for the air to flow. This should do the trick pretty quickly. 

There's one other thing to try.  Many vehicles have electric heater elements embedded in the rear window glass (the rear window defroster) and in the outside rearview mirror glass. Make sure to turn those on, too; sometimes they're on the same switch.

For all of these things to work, of course, your vehicle's components have to be maintained so they'll do the things they're designed to do.  And you didn't think it was important to have your air conditioning working in the cold weather months! 

One final tip.  Keep the insides of your windows CLEAN.  Oil and dirt on the glass give the water molecules something to latch on to.  That ought to clear up this problem.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You may have noticed your vehicle going through lean times.  By that, we mean it's literally leaning to one side.  When you notice that, you should get it checked out at your service facility soon because you could have a serious problem.

Many things can cause a vehicle to lean.  You may have problems with your struts, shocks or springs.  They all work in tandem to make your ride more comfortable.  The struts bear the weight of the vehicle's body, the shock absorbers employ a piston that keeps your tires in contact with the road and controls movement of the vehicle's body.  Springs also absorb impacts from uneven road surfaces.

If these components get stuck, either too high or too low, they cause your vehicle to lean.  That's because that side of the vehicle isn't at the height it is designed to be.  A technician will determine where the problem is.  Outside elements such as moisture plus hard knocks to these components can weaken them, eventually resulting in a failure.  The metal can get so fatigued that it breaks.  Often when one side of a vehicle is too high or too low, your service advisor will advise you to have the other side done as well.  That's because if only one side has new parts installed, it won't be level with the side that has old parts. 

There are a couple of other reasons vehicles can lean.  One is that the suspension can be bent or the chassis twisted, again due to wear and tear by driving on rough roads, over badly maintained railroad tracks or in deep potholes. 

Another reason your vehicle may lean is that the tires and/or wheels aren't all the same size.  Or one side might have drastically over or underinflated tires.  This can be a dangerous condition since the imbalance can affect steering and handling.

Considering what drivers put suspension parts, tires and wheels through, it's not surprising that they can be punished so much that they don't hold up like we want them to.  A level-headed driver will make sure to be driving a level vehicle by making sure these components are maintained in good condition.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

When's the last time you thought about spark plugs? You probably don't remember.  That's because spark plugs usually last a long time and don't need much attention.  But they don't last forever, and when they start going bad, they'll send you a few clues.

• Vehicle is hard to start. 
• Fuel economy is going down
• Acceleration isn't what it used to be
• Engine runs roughly
• Check Engine light is on

There are many things that can cause those symptoms, so it's wise to head on over to your vehicle repair facility to have them look over your vehicle.  But the problem could be your spark plugs. They do wear out, not producing a strong enough spark to ignite your fuel the way they're designed to.  A closely related problem is failing spark plug wires, and a technician will test for both possibilities… and more. 

Your vehicle's manufacturer recommends changing wires and/or plugs at certain intervals.  Spark plugs are made out of different materials and some last far longer than others.  Ask your service advisor to let you know when yours should be changed.  Badly misfiring plugs can cause expensive damage to a vehicle's catalytic converter, so it's best to take care of them before that happens.  Replacing your spark plugs and/or wires is money well spent to have your vehicle running smoothly, dependably and efficiently.  

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

So you thought you only had two brake lights.  Look again and you'll see one in the center at a higher level than the two on either side of the vehicle.  They're sometimes in the inside of the vehicle behind the back window, or they could be in the deck lid, on the roof or on the spare wheel carrier,

But why is that third brake on your vehicle? Experts say it helps prevent rear end collisions. Tests done by installing the third brake light in taxis and fleet vehicles showed fewer rear end crashes in the ones that had the extra light. The third brake light was mandated in new passenger cars in 1986 in the US and Canada.  The requirement was added to new light trucks and vans in 1994.

Sometimes it's difficult to know if your third brake light is even working.  Many vehicles have bulb warning systems that alert you to non-functional bulbs, but not all do. Your vehicle service facility will often check to see if all your turn signals, taillights and headlights are working during routine maintenance inspections, and they may notice that the third brake light is out. 

So, do you have to have it replaced? Not necessarily. Many areas only require one brake light to work in the rear of a vehicle. So even though new vehicles have to have the third brake light, you may not get a ticket if it eventually stops working.  But you may be missing an opportunity to drive a safer vehicle if you don't get it fixed.

In 1995, an insurance institute study found that 1986 model cars were involved in 5 percent fewer rear-end collisions from 1986-1991 than they would have expected without the extra light.

Ask your service advisor for advice.  Keep in mind that in these days of drivers distracted by everything from texting to putting on makeup while driving, you can reasonably conclude that anything that makes you more visible to the vehicle behind you adds one more—possibly life saving—safety margin. 

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You've probably never paid much attention to the writing on the sides of your tires, but they contain a wealth of information.  There's a long combination of letters and numbers that can tell you a whole lot about what tires your vehicle was designed to be riding on.  Let's check out this example found on an SUV: P245/70R17 108T.

The first letter, P, means it's intended for passenger vehicles.  If there's no letter, it means it's a metric tire.  If there's an LT at the beginning or end that means a tire designed for light trucks.

Moving on to our example, the 245 shows how wide the tire is in millimeters from sidewall to sidewall.  The number that follows in our example, 70, means the height of the tire is 70% of its width.  The letter after that in our example, R, describes the type of tire (on this vehicle, radial).  Following that is the diameter in inches, in our SUV example, 17 inches. 

How much load the tires' sidewalls are designed to take is what that next number is all about (108 in our example).  The higher the load index, the more weight the sidewalls can take.  And the last letter is the speed rating of the tire, in our example, T.  The further along in the alphabet that letter is, the higher its speed rating.  So now you know what those letters and numbers mean.  But why are they important?

When you are getting ready to replace those tires, those numbers are telling you what the original equipment was when your vehicle was new.  Sticking with the same rated tires is always a good idea.  If you don't know what you're doing, trying different sized tires and wheels can cause real issues when it comes to performance and safety, considering all the computerized systems now found on vehicles.  When in doubt, consult your service advisor when it comes to buying new tires.  He or she knows what those tire numbers and letters mean… and a whole lot more.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

If you've ever felt your vehicle hesitate, go, then hesitate again, you might think there's something wrong with the transmission.  After all, it's not moving smoothly  down the road.  But there are plenty of malfunctions that can cause those symptoms, one of them being something you may have never heard of: the EGR valve.

EGR stands for Exhaust Gas Recirculation. It's a system that channels small amounts of exhaust back into the engine to cool down the cylinders and reduce polluting gases.  Those include nitrogen oxides that can cause smog. The EGR valve regulates how much of the vehicle's exhaust gas is recirculated. After years and long distances traveled, that valve can get clogged or fail. Sometimes the EGR valve can stick open.  When the EGR valve isn't working properly, your vehicle can start releasing those nitrogen oxides and pollute the air.

The symptoms of a malfunctioning EGR valve include:

• Engine losing power
• Engine idling roughly
• Pinging and knocking sounds in the engine
• Stalling and hesitation
• Fuel economy decreasing
• Check Engine light illuminated

Depending on its condition, the EGR valve can be cleaned or it may need to be replaced.  Consult with your service advisor to see what options are recommended to you.

The EGR system is part of your vehicle's pollution and emissions control equipment. If you care about keeping our planet's atmosphere clean, you'll want to make sure it's doing its job—for everyone's benefit.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com