Auto Repair in Camarillo

In warm weather, you want to be in a cool vehicle. When we're talking cool, we don't mean stylish or trendy, but cool as in not sweltering inside.  And if your vehicle's air conditioner stops working correctly, it seems to always break at the worst time—during a heat wave. 

Automotive air conditioning problems fail for a number of reasons:

• Blower motor not working.  No air comes through the vents, even though the rest of the system could be working fine.
• Refrigerant leak. When the gas that cools the air off escapes from the air conditioning system, your air conditioner can no longer cool off the outside air
• Condenser and compressor. These are parts of your AC system that compress and expand a refrigerant gas to cool off the outside air. They are fairly complex.

When you bring your vehicle into our service center, we'll run a series of diagnostic tests to figure out what isn't working correctly.  The air conditioning system has a lot of parts. There are electrical and mechanical components plus a series of hoses and tubes that all can wear out over time.  Any one of these can fail.

A lot of drivers think they have a "Freon leak" and believe that if they get their AC system recharged with the refrigerant, everything will be fine.  But AC systems are so complex, it usually takes a trained technician to accurately figure out where the problems are.

Sometimes the solution is simple.  If your blower motor wears out or there's a fuse that has blown, the technician can replace the bad parts and you'll quickly be back to enjoying your rolling refrigerator. But when compressors or condensers go bad, those are much more involved and expensive to fix.

For instance, electrical problems can sometimes lead to acid to build up and corrode other parts of your AC system.  Sometimes that causes so much damage, your whole air conditioning system has to be replaced. That's why it's always a good idea to have your AC regularly maintained.  Our technicians can find a problem early and prevent more expensive repairs down the road. That's really the cool way to go.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

When it comes to oil changes, things are really changing.  Most newer vehicles require synthetic oil, and while it costs more than conventional oil, it doesn't need to be changed as often.

When conventional oil was the only game in town, you changed your oil every 3,000 miles/5,000 km. But as technology in newer vehicles has rapidly changed, so has oil technology.  Synthetics have been around since the seventies.  Even though they start with a conventional oil base, they are engineered in a chemical processing plant with properties that allow them to keep your engine lubricated at very high temperatures.  They are more uniform and consistent.

Synthetic oil doesn't break down as easily, so it lasts longer than conventional oil.  And synthetic oil can flow more easily, even in extremely low temperatures.  As you can see, it has performance advantages at both temperature extremes.

Generally, in recent years automakers have been shipping most of their vehicles with either synthetic oil or a synthetic blend.  Blends are cheaper and have many of the advantages of synthetics.  Another reason synthetic oil is being used in many newer vehicles is its ability to flow more easily improves efficiency.   

It's important to follow your vehicle manufacturer's recommendations when you have your oil changed, so our service adviser can see what options you have for your vehicle. Many newer vehicles come with specific recommendations for synthetic oil. If you live in an area with wide temperature extremes or do a lot of stop-and-go driving, synthetic oil can offer advantages. 

Older vehicles can do fine with conventional oil, but it will have to be changed more than synthetic oil. Also, if you have an older vehicle with more than 75,000 miles/120,000 km on it, it can be more prone to leak and burn oil. Some synthetic oils are designed to protect those high-mileage vehicles better than conventional oil, and yours may benefit. See what your service adviser thinks.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

If someone tells you to put the brakes on something, you know it means stop.  And stopping is one of the most important safety maneuvers you can do in any vehicle.  That means your brakes have to work properly. 

Let's face it.  You stop dozens of times every time you drive.  And over time, that takes its toll on your brakes.  Friction is what stops your vehicle.  Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads.

The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle.  Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle. 

The pads usually are the parts that wear out first.  Signs that your brakes might be getting worn are:

• You hear grinding, squeaking, or clicking when you apply them
• It takes a longer distance to stop
• Your pedal vibrates when you brake
• The front of your vehicle pulls to one side when you brake

If you notice any of these, bring your car to us so we can have a technician inspect your brakes. Most brake pads have a wear indicator that indicates it's time they should be replaced.  The technician who is checking things out will also look at your rotors for wear, as well as other brake system components.

With regular inspections and maintenance, you'll be sure that when you need to stop, your vehicle will be up to the task.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Did you know that having a burned out headlight can result in your rearview mirror reflecting some flashing lights? In other words, you might get pulled over by the police for only having one working headlight, because in most places it's against the law. 

Not only is it illegal to drive with one headlight burned out, but it's also dangerous. You can't see down the road nearly as well at night with only one headlight, and other drivers can't see you as easily either.

The good news is many newer vehicles warn you when one of your headlamps burns out. When that happens, have it taken care of as soon as you can.  While there was a time when all headlamps were pretty much the same, the same isn't true these days. There are halogen, Xenon, LED and other technologies used in modern vehicles.  Plus there are sealed beams (like those on older vehicles) and capsules.

If you have a burned out headlamp, ask your service advisor for recommendations.  Usually when one side goes, the other isn’t far behind. Many suggest replacing both headlamps at the same time.  Your vehicle's owner's manual can tell you what the manufacturer recommends.  You also can ask your service advisor about upgrading to a headlight that might give you better visibility. 

In order to make sure you're able to see down the road the way your vehicle was designed and not blind oncoming drivers, it's vital that new headlights be aimed properly.  That's another good reason to have this service performed by a technician. Now, that's a really bright idea.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. 

Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down.

The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always.

Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the surface is flat and doesn't wobble. 

Whenever you bring your vehicle in to have the brakes checked, the technician will measure the thickness of the rotors to see if they can be resurfaced without leaving them too thin for safe braking. If they can, with the right tools and skill, the rotors can be resurfaced.  If not, the rotors should be replaced. 

Discuss the options with your service advisor.  Our service center can recommend replacements that are designed to help stop your vehicle as well as or better than the vehicle's original rotors.

Either way, keep in mind that keeping your brakes in top condition can supply the margin of safety that may one day save your life or the lives of those around you.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You know that sinking feeling when you realize one of your tires has a problem.  It may be making an odd noise or behaving oddly when you're driving.  You may hit a pothole or curb and one suddenly goes flat.  Or you may head back to your vehicle and discover it has one tire deflated without a clue of what must have happened to it.

With a lot of different tires hitting the streets these days, the issue of whether to have a tire repaired or replaced can be tricky, and we strongly recommend you have a trained technician help you make that decision. 

One of the most common causes of flat tires is picking up a screw or nail in the tread area.  Many of those can be patched and plugged if the puncture isn't more than ¼ inch/6 mm in diameter. Most tires can handle two of this type of repair, but any more and you should buy a new tire. 

If there's a puncture or bulge in the sidewall or shoulder, the rule of thumb is it's not repairable.  The sidewall doesn't have the reinforcements that the tread area does.  In fact, any puncture that's more than a ½ inch/12 mm away from the edge of the tread should not be fixed. 

Many newer vehicles have no spare tires (to save weight and fuel) and instead have a type of tire called "run-flat."  Sometimes, the only way you know they're deflated is when the tire pressure monitor alerts the driver.  Driving on them more than 50 miles/80km can render them un-repairable.  They may be fixable if you pulled off to the side of the road before driving on them too long. Our technicians can evaluate whether they can be driven further or should be replaced.

Other vehicles with no spare include a can of tire sealant and a compressor.  If you use it, tire experts say to have the tire professionally repaired as soon as possible.

If you have had a flat tire, try not to drive on it unless it's necessary to get your vehicle away from a dangerous situation.  Our technicians can evaluate any tire you may be having problems with and recommend whether repair or replacement is the best option. Your safety is riding on your tires.  

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

On a hot day, you want your vehicle's air conditioning to work.  When the air blowing out of your vents isn't cold, it's easy to think, "I'll just take it by the shop and have them top off my refrigerant." But while some people think air conditioning is that simple, it's actually not.

If your refrigerant is low, something has to have happened for it to be depleted.  Perhaps there's a leak in the system.  Or some hoses or clamps have failed.  If the system isn't evaluated by someone who knows air conditioning, it's possible that adding refrigerant will just be a band-aid solution.

It's also possible that contaminants have gotten into the refrigerant, such as carbon dioxide, nitrogen, argon, or air.  Some of those gases do not condense like refrigerant does which can increase the pressure inside the system and strain the lines and other components. At that point, the best course of action may be to have the old refrigerant (with its contaminants) bled from the system and have your AC recharged with new refrigerant.

Bring it to us, and we can inspect and test the system and all its components.  That will include a pressure test for leaks.  Most vehicle manufacturers don't have a service schedule for air conditioning systems, so one way to know when you should have it looked at is when it's not behaving the way it used to.  For example, it may not get cold as fast as it did before or even at all.

So, when hot air is exiting your vents when you want it to be cold, schedule an appointment and have a trained technician take care of it.  Are you cool with that?

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers.

Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels. 

There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle.

While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem. 

If your vehicle pulls to one side when you brake, that could be a sign that one caliper isn't working right.  If you smell a burning odor coming from a wheel after a trip, there might be too much pressure from a caliper.  Grinding or squealing when you brake is another signal that it may be time to bring in your vehicle so we can check your brakes.

One way to minimize brake issues is regular inspection.  Have them periodically looked at when you bring in your vehicle for an oil change.  The good news is brake issues are more likely to be caused by pads or rotors wearing out.  Calipers last a lot longer, but even they will need replacing every so often.  

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

You may notice that when you get your vehicle's oil changed, your service adviser may recommend that you have your tires rotated at the same time.  The reasons are simple.  That will allow your tires to wear more evenly and reduce the noise your tires make as you drive down the road.

There are different ways of rotating tires. If your vehicle has non-directional tires and the same size wheels at each corner, here are the different rotation patterns.

For all-wheel drive and rear-wheel drive vehicles, one is called the rearward cross pattern.  The rear tires are moved to the front and stay on the same side of the vehicle, and the front tires are moved to the rear on the side opposite of where they were on the front. 

For all-wheel and four-wheel drive vehicles, use the X pattern.  The rear tires are moved to the front on the opposite side of the vehicle, and the fronts are moved to the rear on the opposite side of where they were on the front.

For front-wheel drive, there's the forward cross.  The front tires are moved to the rear wheels on the same side of the vehicle as they were on the front and the rear tires are moved to the opposite side of the vehicle than they were on the rear. 

If you have directional tires (they only can be mounted in one direction) and the same size directional wheels, the rear tires are moved to the front on the same side of the vehicle where they were, and the front tires are moved to the rear on the same side they were on the front.   And if you have tires with different sizes of non-directional tires and wheels on the front and rear, rotation will be from one side of the vehicle to the other. 

If you have a spare, it's put into the rotation using a forward cross or rearward cross. 

Yep, that's a lot to keep straight.  So, we suggest letting your service advisor recommend the right rotation pattern for you at the interval your vehicle's manufacturer specifies.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com