Auto Repair in Camarillo

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then the spark plugs fire, the explosive fuel/air mixture detonates, and these sequential explosions provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information about the amount of air entering the engine, the fuel/air mixture won't be right. It will be either too rich (too much gasoline relative to the amount of air) or too lean (not enough gasoline relative to the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

When you get in your vehicle, how does it smell? If it's not so nice, it may be time to have your cabin air filter changed.

It's not the same one that filters out the air used in the engine.  The cabin air filter screens out dust and other particulates from the outside air so when it enters the cabin, you don't have to breathe them in when you're driving.  Maybe your commute finds you traveling along dusty rural roads, or maybe you pass by some city factories that have smokestacks spewing out smoky exhausts.  Or in spring, maybe you notice your allergies acting up because of the pollen in the air.  The cabin air filter will remove a lot of those things.

The more it filters out, the more those small particles add up.  That reduces how much airflow the heating/air conditioning system can handle, and you may notice not as much air is coming through your vehicle's vents.  That can also be a sign you need your air filter replaced.

Our technicians will remove and inspect the air filter; it's usually located around the glove compartment, under the dash or sometimes in the engine compartment. If you wish, your service advisor can show you what condition yours is in; if it needs replacing, you'll be able to see the dirt, bugs, leaves and other crud that accumulates after several months of driving. 

Each vehicle's manufacturer recommends an interval after which your cabin air filter should be replaced. Depending on how much and where you drive, you might find yourself needing a replacement more or less often than the manual suggests.

Just like you clean your furnace filters periodically, it's wise to do the same with your vehicle.  After you do, you'll find you might just breathe easier!

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

When you hear hissing sounds coming from your vehicle, you might start thinking the worst.   One type of hissing coming from around your air conditioner may be a normal sound, or it could be a sign of serious trouble.

First - the normal sound.  When you turn off your vehicle, the refrigerant goes from its high-pressure side to the low-pressure side. Some of those noises are normal.  But when it hisses all the time, that's another story.

One cause could be that the refrigerant is leaking.  Air conditioners are fairly complex systems that involve various pumps, hoses, valves and motors.  When your air conditioner is cooling, the refrigerant changes from a gas to a liquid and back.  That refrigerant is under pressure, and there are many places it can leak from. 

A hissing sound can also be a failed valve in your air conditioner's compressor.  It is what controls the refrigerant's pressurization.  It's important to have this fixed fairly quickly after it develops a problem because when it isn't, that can lead to more extensive—and expensive—repairs.

If you hear screeching coming from your air conditioner at the same time you hear hissing, your compressor may be on its last legs. It could also be a defective clutch. 

Any time you hear a noise you haven't routinely heard before, bring your vehicle to us so a technician can check the various components and properly repair the problems.  Air conditioning systems are complex and are best handled by a professional with the right tools and equipment.  When your AC has a hissy fit, let us cool it off and you at the same time.  

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

There's a belt that snakes through your engine.  It's even named for a snake, the serpentine belt.  It'll bite you when it breaks, possibly leaving you stranded.  So, it's good to know a little about this snake-like belt.

In early engines, there were lots of belts. They were used to convert the rotating power of the engine to turn a mechanical part.  But engineers had an idea.  Why not consolidate all those belts into one that ran a bunch of different parts simultaneously? Voila!  The serpentine belt.

It's found in the front or side of your engine unlike older belts which were often in a V shape, the serpentine belt has ribs on it which more effectively connect with the pulleys that power the other components.  A serpentine belt may power the water pump, power steering pump, alternator, and the air conditioning: all from one crankshaft. 

Now, all that's fine when everything is working well and the belt is intact.  But when a serpentine belt wears, gets loose, or breaks, it can affect many engine components at once.  Not an ideal situation. 

If you hear squeals coming from the engine compartment, see a battery light, or the engine overheats, those could be signs that your serpentine belt needs replacing.

The good news is that they usually last a long time, from 60,000-100,000 miles or 100,000-160,000 km.  Still, they don't last forever, and your vehicle's manufacturer usually recommends replacing them when they've gone close to the expected maximum.  It’s also recommended that you replace the pulleys and belt tensioner at the same time as they have the same service life. Regular maintenance and inspection of the serpentine belt is not only a good idea; it’s one of those things that you should not let "slip" by.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Warm weather can bring severe storms, and when the rain is coming down hard, that's one time you really need to be able to see as clearly as possible out your windshield.  Having wiper blades that are fit for the job are important to maintain that safe view.

Maybe you live in a climate where you use blades made for winter weather and you have haven't changed them since the weather changed.  Those blades are made of heavier materials and don't work as well in warmer temperatures. Blades made for warm temperatures are lighter and clear water better in the warmer months.

The general rule of thumb is you should change your blades every six months, but if you use them a lot, you might have to change them more often.  A couple of signs that your blades need changing? If you are seeing streaks on the glass or hearing a chattering sound when your wipers are working, time for a new pair.

Wiper blades have cleaning windshields on vehicles for more than 100 years.  The original designs have a multi-part frame that are better for flatter windshields.  But newer vehicle designs now have curvier windshields, so a more recent design is called a blade wiper.  It's designed to conform better to the glass so cleans it better. 

Conventional wipers also aren’t as aerodynamic as blade wipers. Wind buffeting can reduce the pressure they apply on the rubber to the glass.  With a spoiler as part of their design, blade wipers are pressed more tightly to the glass, an advantage in clearing water from it.

Another option is hybrid blades, essentially a conventional blade with a plastic shell around the wiper's frame that makes it more aerodynamic and, some say, gives it a more aesthetic look. 

There are lots of choices, so consult our service professionals for a recommendation on which blade fits your needs—and budget—best.  Keep your eyes on the road and keep your windshield sparkling clean, rain or shine.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

Maybe you've been cooped up for a while and are yearning for a change of scenery.  Or maybe you need to visit a relative who lives far away.  You choose not to fork out the big bucks for airline tickets, so it's time for a road trip.  Make sure you're road ready by having your vehicle professionally inspected before the big drive.

One of our technicians can check out several of your vehicle's most important systems so you can be more confident that you'll be able to go the distance without a breakdown.  Here are a few things a trip inspection may include:

Your vehicle stops with brakes that, in turn, stop the tires.  They must both be in sound condition. The technician can look at your tire tread, the condition of the sidewalls, and note the tires' age.  Brakes have pads and rotors that should meet certain specs, so an expert inspection of their condition is important, too.

A technician can check other vital fluids such as engine coolant, power steering, transmission, and windshield washer fluid. Your wipers must be in good condition so you can see, and they're often one of the most neglected parts of a vehicle. 

Your headlights must work correctly and be aimed properly so you can see and so that you're not blinding oncoming drivers. They're powered by your battery, and a technician will check how old yours is and how well it holds a charge, all important for reliable starting. 

For cabin comfort, your climate control system needs to work correctly, which means both heat and air conditioning.  If things need to be repaired - before the trip will be a lot more convenient than trying to do it while you're traveling.

The technician can inspect hoses and belts, two things that frequently fail on a long trip.  And the big advantage of having a pro look over your vehicle is that they not only know what to look for but also can make the repairs the right way.  Now that'sthe ticket to being road ready.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

When you head out to your vehicle after it's been parked and notice oil leaking underneath it, that's something to have looked at right away.  Oil leaks mean your oil level is probably low and running a vehicle in that condition can lead to expensive repairs.

While there are many reasons oil leaks develop, one possibility is a bad valve cover gasket.  Vehicle engines have a cover bolted over the spot where the engine valves are, and that cover keeps the oil inside the engine. In between the cover and the engine is a gasket that keeps that seal tight.  But after many years of high engine temperatures and vibrations, that gasket or the bolts that hold on the valve cover can fail or loosen, and oil can leak.

You may see dirty oil on the valve cover in the engine compartment, near the spark plugs, or around the bolts that hold the valve cover on.  All those are signs of leakage and time to bring your vehicle in for our technicians to check out.

In some vehicles, taking off the valve cover and replacing the gasket is a relatively easy job. In some models, though, other engine parts are located near that part of the engine and must be removed to get at the gasket, so repair costs can vary widely.

The technician will measure to make sure the valve cover isn't warped so it can be reused. If it is warped, they'll recommend replacing it with the gasket.  

While the technician has that area of your engine accessible, they will also check to see if other components need replacing at the same time, which could save you money.  And because valve cover gaskets usually fail in older vehicles, the technician will check for other oil leaks then, too. 

One of the best ways to be sure your valve cover is doing its job is to have your vehicle regularly maintained.  The technician will periodically look over your engine compartment and make sure you know when things are showing signs of age and wear BEFORE they fail and leave you stranded.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com

No matter what the temperature is outside, it's important for your vehicle's engine to remain cool, calm, and collected.  Well, cool, anyway. If your vehicle has a gasoline engine, it's powered by a bunch of explosions involving spark plugs, pistons, gasoline, and air.  And the by-product of all those things working together? HEAT.

There's a whole cooling system to keep everything at a tolerable temperature for your engine's parts, and a key part of that is the water pump.  Technically, it's pumping more than water. It should actually be called the "coolant" pump since the liquid that circulates through the system is a mixture of water and coolant. 

Basically, the water pump keeps this coolant moving through your engine, where it picks up the engine heat, and then is pumped into the radiator where it gets rid of that heat.  When a water pump fails, the engine heat can build up.  When you get a warning light on the dash (either a gauge or a light) that shows the temperature is too high, it could mean a bad water pump. 

They can fail for many reasons. They have bearings in them that wear out, as does the seal between the pump and the engine. They're often driven by a belt or chain that can go bad.  Corrosion can spell the end of a water pump, too. 

If a technician determines your water pump has failed, it's time to replace it. In addition, other components of the cooling system will be inspected.  The best way to avoid a water pump failure is regular maintenance of your cooling system which includes regular draining and flushing of the coolant. 

Just like it's important for you to keep your cool, the same goes for your vehicle's engine.

Camarillo Car Care Center
2739 Daily Drive
Camarillo, CA 93010
805-482-2853
www.camarillocarcare.com